![]() ![]() Insert the DAT CD, provided with the 190-3170K Adapter Kit, in the PC’s CD-ROM drive. Copy the seven files on the CD to the “GTC DAT Files” folder and remove the DAT CD from the drive. ![]() The TK-3170 Series Radios have multiple frequency capability, however the RF Call Box only utilizes one transmit and one Receive frequency. Multiple radio channels can be programmed into the radio list, but only one may be used at a time. Select the appropriate channel via the channel selector on the top of the portable. The KPG-101D Software contains a complete and concise help file to explain all the parameters pertaining to your standard programming needs. : The DAT files provided with the 190-3170K Adapter Kit include pre-programmed The information below pertains to programming necessary for proper RF Call Box operation. All KPG-101D programming changes required for proper RF Call Box operation are noted in the following instructions. Connect the 25-pin male serial port connector (KPG-22) or nine-pin male serial port connector DO NOT change or modify any other parameters other than those specifically noted in these instructions.Ĭonnections (KPG-22 or KPG-22A Programming Cables)ġ. (KPG-22A) to one of the PC’s serial ports.Ģ. Insert the proprietary accessory connector (3.5/2.5 mm) to the radio’s accessory port.ģ. Upon start-up of the KPG-101D, the software will open to theĤ. Select File from the menu, then Open from the drop-down box. The GTC DAT File screen shouldĪutomatically appear on the screen. Select the “CALL_x17x_.dat” file corresponding to the transceiver model number and the Squelch If it does not automatically appear, use the “Look In” screen and follow “Program Files\Kenwood Fpu\KPG101D\DATA” to access the DAT files.ĥ. This transfer can also be accomplished by simply double clicking on the desired DAT file.AMATEUR RADIO PRODUCTS SOFTWARE DOWNLOADSĪmateur radio instruction manuals downloads The pre-selected information will be transferred to line 1 of the Zone Information screen.įor example, if a TK-3170 UHF transceiver is to be used with Tone Operated Relay, select file “CALL_3170_TOR_OUT.dat” (this information will appear in the File Name box). PC CONTROL COMMAND REFERENCE FOR THE TS-890S TRANSCEIVER (PDF:841KB)įirmware Updating Program TS-590G Update Version 1.06 TS-890S KENWOOD NETWORK COMMAND SYSTEM Setting Manual (PDF:1.63MB) Radio Control Program ARCP-890 Version 1.01 PC CONTROL COMMAND REFERENCE FOR THE TS-990S TRANSCEIVER (PDF:773KB) TS-990S KENWOOD NETWORK COMMSND SYSTEM Setting Manual (PDF:898KB) USB Audio Controller ARUA-10 Version 4.00 Radio Control Program ARCP-990 Version 1.04 #Kpg 101d manuals# ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |